Crestron GLS-EM-MCU Dokumentacja Pobierz pdf (Strona 13)

Crestron GLS-EM-MCU Crestron Green Light

Power Meter Control Unit

Operations Guide – DOC. 7294B Crestron Green Light

Power Meter Control Unit: GLS-EM-MCU

•

Connectors, Controls & Indicators (Continued)

# CONNECTORS*,

CONTROLS &

INDICATORS

DESCRIPTION

5 LINE1 – LINE3 LEDs (3) Green LEDs, indicate line voltage is

present on each input LINE1 through LINE3

CT1 – CT3 LEDs (3) Green LEDs, indicate current is flowing

through CTs connected to ports CT1 through

CT3

6 PULSE INPUTS 1-4 (1) 8-pin 3.5 mm detachable terminal block

comprising (4) programmable digital inputs

(referenced to GND);

Input Voltage Range: 0-24 Volts DC;

Logic Threshold: ≥1.25 Volts DC active/high,

≤0.46 Volt DC inactive/low;

Frequency Range: 0.05 - 100 Hz

7 USB (1) USB Type B console port, for

communication with Crestron Toolbox™

8 RESET (1) Push button for hardware reset

9 SETUP (1) Miniature push button for setup; (1) Red

LED, indicates device is in Setup mode

10 NET (1) Yellow LED, indicates communication to

one or more GLS-EM-CTI

11 LAN (1) 8-wire RJ-45 jack (8P8C modular

female); 10BASE-T/100BASE-TX Ethernet

port

* Interface connectors for BRANCH CIRCUIT MONITORS, CT1 – CT3, and

INPUTS 1-4

ports are provided with the unit.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Brak uwag

Crestron GLS-EM-MCU Dokumentacja Strona 13