Crestron CHV-TSTATEX Przewodnik Instalacji Strona 31
- Strona / 92
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Crestron CHV-TSTAT and CHV-THSTAT Thermostats
Operations and Installation Guide – DOC. 8163E Thermostats: CHV-TSTAT and CHV-THSTAT
•
25
NOTE: When the Reverse SMODE Dir (reverse system mode direction) selection is
set to Yes on the “SCRN OPTIONS” (screen options) setup screen, the arrow keys
(▲ ▼) can be used to select system mode functions in both directions.
NOTE: If an out of range setpoint is entered, it is ignored.
NOTE: The screen options selected during setup are seen when the View key is
pressed in normal operation.
System Types and Definitions
The first setup choice is the heat system type. There are three main types of
heating/cooling systems:
1. Heat/Cool, Radiant Heat or Forced Air Heating/Cooling, 1 or 2 Stages
2. Heat Pump, 1 or 2 Stages, Auxiliary Heat or Dual Fuel
3. Slab System (Slab1 through Slab 5B)
1. Heat/Cool Systems Definitions
Radiant Heat: Radiant heat is a form of hydronic (hot water) heat that
circulates hot water through pipes (baseboard radiation systems) or special
tubing and installs on the perimeter of the house or underneath floors.
Forced Air: In a ducted heating/cooling system, a large fan (blower) forces
heated air from the furnace into the ducts and enters the rooms through a
register or grill in the floor or wall.
One or Two Stages: Unlike traditional furnaces that turn on and run at full
capacity with each demand for heating, 2-stage furnaces operate like two
separate furnaces. The unit begins to run in its first stage, and operates at a
fraction of its heating capacity. This reduced capacity is sufficient on mild
winter days. On very cold days, the furnace adjusts to full capacity (second
stage) to meet the demand for heat.
Refer to “Heat/Cool, 1 or 2 Stages, Forced Air or Radiant” which begins on
page 27.
2. Heat Pump Systems Definitions
A heat pump extracts available heat from one area and transfers it to
another. Even cold air contains some heat, and heat pumps can extract heat
from the outside air on a cold day and transfer it indoors to maintain a
comfortable temperature. A heat pump also works in reverse during the
summer, extracting heat from indoors and transferring it outdoors.
Dual Fuel: A dual fuel system combines an energy efficient air source heat
pump with a new or existing oil, gas or propane furnace. The furnace runs
in place of the heat pump in cold weather.
Aux (Auxiliary) Heat: When the a heat pump can no longer efficiently
transfer heat from the outside air, the thermostat automatically turns on a
secondary heat source, such as electric resistive heat.
Refer to “Heat Pump, 1 or 2 Stages, Aux Heat or Dual Fuel” which begins
on page 31.
- Thermostats 1
- Contents 3
- Thermostats: CHV-TSTAT and 7
- CHV-THSTAT 7
- Firmware Versions 8
- Remote Sensors 8
- Heating and Cooling Systems 9
- Specifications 10
- HEAT ONLY 11
- H1 H2 AX 11
- # CONNECTORS 14
- CONTROLS & 14
- INDICATORS 14
- DESCRIPTION 14
- Identity Code 15
- Network Wiring 15
- System Connections 16
- Wiring Diagrams 17
- 1-Stage Heat Only Systems 18
- 1-Stage Cool Only Systems 19
- Systems 20
- 1-Stage Heat Pump Systems 22
- 2-Stage Heat Pump Systems 23
- Space Heating) Systems 24
- Heat/Cool Systems 25
- Installation 28
- Thermostat Setup 30
- System Types and Definitions 31
- SETUP: SYSTEM 33
- SETUP: SYSTEM PERFORMANCE 33
- SETUP: HUMIDITY OPTIONS 34
- SETUP: DEVICE OPTIONS 34
- SETUP: SCREEN OPTIONS 34
- SETUP: DISPLAY OPTIONS 35
- SETUP: OTHER SETTINGS 35
- SETUP: SENSORS 35
- SETUP: HUMIDITY SENSORS 36
- SETUP: SENSOR DEBUGGING 36
- SETUP: SERVICE/TEST 36
- Slab 1 – Floor Warming Only 41
- Press To Continue 45
- OTHER SETTINGS 55
- SETUP: SENSOR DBG 56
- SETUP: HUM OPTS 58
- Invert Hum Output Y 58
- Call FAN in HUM: N 58
- ADJUSTS HEAT SHUTOFF DYNAMICS 61
- Main Screen 69
- View Button Menus 70
- Mode Button Menus 71
- “Crestron System” Screen 72
- “Global Update” Screen 72
- Slab 5 Systems 73
- Crestron Sys 74
- Slab 1 and Slab 2 Systems 75
- Slab 4 Systems 76
- Uploading and Upgrading 78
- Programs and Firmware 79
- Program Checks 79
- Problem Solving 80
- in SIMPL program 81
- Error Message Format 82
- Local Error Messages 83
- Check Network Wiring 83
- Future Updates 85
- Appendix A: About Heat Pumps 86
- Glossary 87
- Return and Warranty Policies 89
Powiązane produkty i podręczniki dla Termostaty Crestron CHV-TSTATEX
(40 strony)Krystal Touch of NY DL3660CPRI manuals
Owner’s manuals and user’s guides for Unknown Krystal Touch of NY DL3660CPRI.
We providing 1 pdf manuals Krystal Touch of NY DL3660CPRI for download free by document types: Installation Guide
Komentarze do niniejszej Instrukcji