Crestron CP2 Instrukcja Użytkownika Pobierz pdf (Strona 11)

Crestron CAGE2 3-Card Expansion Cage for AV2

8. Refer to the diagram below. Align the PCB jumper to the AV2

processor board connector and slide the CAGE2 assembly towards rear

of AV2. Make sure that PCB jumper is inserted into the AV2 connector

and align the CAGE2 bottom and rear mounting holes.

CAGE2 Installation (7 of 11) - Slide CAGE2 Assembly Rearwards

9. Refer to the diagram below. Install the two bottom-mounting screws

that were removed in step 5 to finger-tight

then, using a #2 Phillips tip

screwdriver tighten the screws an additional 1/8-turn

CAGE2 Installation (8 of 11) - Install Bottom-Mounting Screws

Installation Guide - DOC. 5964 3-Card Expansion Cage for AV2: CAGE2 • 7

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Crestron CP2 Instrukcja Użytkownika Strona 11