Crestron CP3 Dokumentacja Pobierz pdf (Strona 21)

Crestron CP3 3-Series Control System™

Operations Guide – DOC. 7316A 3-Series Control System™: CP3  17

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade it is necessary to establish

communication. Once communication has been established, files (for example,

programs or firmware) can be transferred to the control system (and/or device).

Finally, program checks can be performed (such as changing the device ID or

creating an IP table) to ensure proper functioning.

Establishing Communication

Use Crestron Toolbox for communicating with the CP3; refer to the Crestron

Toolbox help file for details. There are four methods of communication: direct serial,

indirect, USB and TCP/IP.

Direct Serial

NOTE: Required for initial setup of Ethernet parameters.

Direct Serial Communication

Serial via

Crestron Cable

STCP-502

or Equivalent

PC Running

Crestron Toolbox

CP3

The RS-232 port on the CP3 connects to the serial port on the PC via a serial cable

(Crestron STCP-502 or equivalent):

1. Use the Address Book in Crestron Toolbox to create an entry using the

expected serial communication protocol (RS-232, auto-detect baud rate, no

parity, 8 data bits, 1 stop bit, XON/XOFF disabled, RTS/CTS disabled).

2. Display the CP3’s “System Info” window (click the

icon);

communications are confirmed when the device information is displayed.

Indirect

Indirect Communication

Cresnet

Control System

PC Running

Crestron Toolbox

or USB

Serial,

LAN CP3

CP3 connects to control system via Cresnet:

1. Establish communication between the PC and the control system as

described in the latest version of the 3-Series Control Systems Reference

Guide (Doc. 7150).

2. Use the Address Book in Crestron Toolbox to create an entry for the CP3

using the expected communication protocol (indirect). Select the Cresnet ID

of the CP3 and the address book entry of the control system that is

connected to the CP3.

3. Display the CP3’s “System Info” window (click the

icon);

communications are confirmed when the device information is displayed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Crestron CP3 Dokumentacja Strona 21

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Crestron CP3