Crestron CPC-2000A Dokumentacja Strona 8

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 24
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 7
Pan/Tilt Camera Head with Control Interface Crestron CPC-CAMI
CPC-CAMI Indicators
A number of indicators are located on the CPC-CAMI interface box. Each has a silk-
screened label. Refer to the illustration shown in “CPC-CAMI Ports” on page 3 and
the descriptions after this paragraph.
POWER
This LED illuminates when 24 VDC is supplied to the CPC-CAMI.
NET
This LED illuminates when communication between the control system and the
CPC-CAMI is established. Illumination indicates that the SIMPL program currently
loaded has a network device defined at the same NET ID as the CPC-CAMI.
CALIB
Flashing LED indicates CPC-CAMI has entered calibration mode.
FZ
Indicates focus and zoom activity as the result of manual control at the unit.
CPC-CAMI Buttons
A number of buttons are located on the CPC-CAMI interface box. The purpose of
these buttons is to permit local manual operation of motor control functions when
installing the unit. Each has a silk-screened label. Refer to the illustration shown in
“CPC-CAMI Ports” on page 3 and the descriptions after this paragraph.
NOTE: Each set of up () and down () buttons provides dual function. For
example, the upper-most up/down button provides either pan movement of the head
or focus adjustment of the lense depending on mode.
PAN (LEFT)/FOCUS (IN)
This button provides either manual pan leftward movement of the camera head or
manual focus inward control of the camera lens.
PAN (RIGHT)/FOCUS (OUT)
This button provides either manual pan rightward movement of the camera head or
manual focus outward control of the camera lens.
TILT (UP)/ZOOM (IN)
This button provides either manual tilt upward control of the camera head or manual
zoom inward control of the camera lens.
TILT (DOWN)/ZOOM (OUT)
This button provides either manual tilt downward control of the camera head or
manual zoom outward control of the camera lens.
MODE
This button toggles between pan/tilt and zoom/focus movement.
CALIB
Depressing the TILT (UP) and MODE buttons simultaneously enables the unit to
enter calibration mode.
6 Pan/Tilt Camera Head with Control Interface: CPC-CAMI Operations Guide - DOC. 5726A
Przeglądanie stron 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag