
Crestron TPS-12L/15L/17L Isys
®
Wall Mount Touchpanels
Mounting Options
The TPS-12L/15L/17L touchpanel installs simply and cleanly into existing or newly
constructed walls with an assortment of pre- and post-construction mounting options.
All mounting options are provided separately from the actual touchpanel. Refer to
the following table for a complete list of mounting options.
TPS-12L/15L/17L Mounting Options
PRE-
CONSTRUCTION
OPTION
POST-
CONSTRUCTION
OPTION
MODEL NUMBER
DOCUMENT
NUMBER
Back Box Kit -
BB-12L
BB-15L
BB-17L
6357
6362
6367
Pre-Construction
Mount Kit
-
PMK-12L
PMK-15L
PMK-17L
6358
6363
6368
Mud Mount Kit
(Accessory)
-
MMK-12L
MMK-15L
MMK-17L
6359
6364
6369
Trim Mount Kit
(Accessory)
-
TMK-12L
TMK-15L
TMK-17L
6360
6365
6370
- Wall Mount Kit - Mud
WMKM-12L
WMKM-15L
6359
6364
- Wall Mount Kit - Trim
WMKT-12L
WMKT-15L
WMKT-17L
6360
6365
6370
NOTE: Pre-construction refers to framed walls prior to hanging drywall.
Post-construction refers to framed walls with drywall hung.
NOTE: Rack mounting kits (RMK-12L and RMK-15L) are also available for these
touchpanels. Refer to the latest versions of the RMK-12L and RMK-15L Installation
Guides (Docs. 6361 and 6366, respectively).
Touchpanel Mounting
Tools Required: #2 Phillips tip screwdriver
1. If the cover plate is attached, use a #2 Phillips screwdriver to loosen and
remove the four screws and plate.
2. Connect all required cables to the touchpanel. Refer to “Hardware Hookup”
on page 40 for details.
3. Insert the touchpanel (without its bezel) into the mounting option and align
the eight screw holes.
4. Insert and tighten the eight supplied screws (finger tight and then using a #2
Phillips screwdriver, tighten an additional 1/8-turn).
5. Cover the mounted unit with the bezel. Refer to the illustration following
this step.
Operations Guide – DOC. 6355A Isys
®
Wall Mount Touchpanels: TPS-12L/15L/17L • 39
Komentarze do niniejszej Instrukcji