Crestron TPS-4500LV Dokumentacja Pobierz pdf (Strona 37)

Crestron TPS-4500V & TPS-4500LV 12 Inch Tilt/Lectern Touchpanels

Communication Settings

Connection of a PC to the TPS-4500V/LV touchpanel can be direct via the RS-232

port on the touchpanel or through a control system (Cresnet). Both methods of

connection provide setup for RS-232 communication.

NOTE: For laptops and other PCs without a built-in RS-232 port, Crestron

recommends the use of PCMCIA cards, rather than USB-to-serial adapters. If a

USB-to-serial adapter must be used, Crestron has tested the following devices with

good results:

Belkin (large model) F5U103

I/O Gear GUC232A

Keyspan USA-19QW

Other models, even from the same manufacturer, may not yield the same results.

To prepare the TPS-4500V/LV for uploading or upgrading, refer to the following

figure for a typical connection diagram.

Typical Connection Diagram when Uploading a Project

To prepare the TPS-4500V/LV for uploading or upgrading directly from a PC, refer

to the following figure. Connect the RS-232 port of the computer directly to the RS-

232 port of the touchpanel. Refer to page 15 for RS-232 cable information.

NOTE: Directly connecting to the touchpanel over RS-232 provides a faster

transmission speed than Cresnet.

Typical Connection Diagram when Uploading a Project Directly to the Touchpanel

NOTE: For cable pinouts, refer to “RS-232” on page 15.

Operations Guide - DOC. 6160 12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV • 33

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Brak uwag

Crestron TPS-4500LV Dokumentacja Strona 37