Crestron BB-1600 Instrukcja Użytkownika Pobierz pdf (Strona 7)

Crestron BB-1600 Back Box

Installation Guide - DOC. 5835A Back Box: BB-1600 •• 3

Installation

There are at least two different methods of installing the BB-1600. The

construction method is preferred during the construction process. Use this

method to wall mount a Crestron Series 1600 Lectern/Wall Mount

Touchpanel to a wall stud. At this time the rooms in which the panel is to

be installed are framed and the gypsum board has not been hung. The

post-construction method is preferred for wall mounting when the rooms

are complete and the gypsum board has already been hung. The post-

construction method is also desirable when lectern mounting the panel.

Construction Method

This method requires two #6 mounting screws (or equivalent) and a drill

with bit for two #6 mounting screws. Other tools required include a #2

Phillips tip screwdriver, a socket screwdriver (length should not exceed

4.5"), a 5/16” drill bit, a #20 drill bit, and a gypsum board saw (or

equivalent). Complete the following installation procedure in the order

provided.

1. Remove necessary knockout(s) from metal electrical box.

2. Use four socket hex head screws (3/8” length), supplied, to

loosely secure two metal brackets to the back box.

3. Position the metal electrical box to the stud. If

" gypsum board

is used, be sure that ½" of the box protrudes from the stud as

illustrated in the metal electrical box cut away shown on the next

page.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Brak uwag

Crestron BB-1600 Instrukcja Użytkownika Strona 7