Crestron TPMC-9L Przewodnik Instalacji Pobierz pdf (Strona 30)

9” Wall Mount Touch Screen Crestron TPMC-9L

Use the Sensor Threshold controls to set the level at which the Auto Brightness

Control, when set to ON, adjusts screen brightness. The Sensor Level meter is

provided as a guide to setting the threshold.

Touch Return to go back to the main Setup menu.

Keypad

From the main Setup menu, touch Keypad to enter the Keypad Backlight Settings

screen, shown in the illustration below.

Keypad Backlight Settings Screen

The Keypad Backlight Settings screen contains buttons for setting the TPMC-9L’s

Auto Key Backlight Control for optimal performance to match the color bezel

(white, almond or black), setting the control manually or turning off the key

backlighting. There are also controls for pre-setting the Key Brightness Level –

HIGH and Key Brightness Level – LOW, as well as HIGH and LOW buttons for

instantly activating these presets. In addition, there are controls to set the Sensor

Threshold and a Current Light Sensor Level meter, like the one on the main

Diagnostics menu (refer to “Diagnostics” which starts on page 21) and on the

Display Settings screen (refer to “Display” which starts on page 25), to indicate

ambient light level.

With the Auto Key Backlight Control set to Manual, the key backlighting is at the

level set by the Keypad Backlight Brightness controls (which appear in place of the

Sensor Threshold and Current Light Sensor Level meters, as shown in the

illustration that follows).

Keypad Backlight Brightness Controls

Use the Keypad Backlight Brightness controls to adjust the relative level (0% to

100%) of current key backlighting. Use the Key Brightness Level – HIGH and Key

26 • 9” Wall Mount Touch Screen: TPMC-9L Operations & Installation Guide – DOC. 7030F

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Brak uwag

Crestron TPMC-9L Przewodnik Instalacji Strona 30