Crestron CP3N Informacje Techniczne Strona 24

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 86
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 23
Reference Guide Crestron 3-Series Control Systems
20 3-Series Control Systems Reference Guide DOC. 7150A
NOTE: Auto-Run mode is only available when external memory is inserted
into the control system.
NOTE: Control systems are shipped with the Auto-Run mode enabled by
default.
3. Click the Enable Auto-Run check box to enable the Auto-Run mode. When
operating in the Auto-Run mode, the control system is automatically reset
and runs the external program when the external storage is inserted into the
control system. If the external storage is removed, the program in internal
Flash automatically runs. When Auto-Run mode is disabled, the Program
Reset command must be sent to the control system after the external
storage is inserted or removed to run the program.
4. Click OK or Apply for changes to take effect.
Przeglądanie stron 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 85 86

Komentarze do niniejszej Instrukcji

Brak uwag