Crestron C2N-NPA8 Dokumentacja Strona 14
- Strona / 40
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Network Poll Accelerator Crestron C2N-NPA8
Segments that are not in use or have devices that are not polled by a Crestron SIMPL
Windows program are logically ‘disconnected’ from the other segments in operation.
The LEDs for these segments are not illuminated.
To properly configure a network using a C2N-NPA8, the network traffic should be
balanced across the eight legs of the C2N-NPA8.
NOTE: The tips described below can be used as a starting point for balancing the
network traffic on most networks. Contact Crestron’s True Blue Technical Support
to determine the best configuration for your network.
Configuration Tips
• Place ALL Cresnet devices on the segments of the poll accelerator and
nothing on the control system’s Cresnet bus.
• Group all devices by device type and assign consecutive Cresnet ID
numbers.
• Place devices on sequential segments of the poll accelerator in order of
Cresnet ID number (i.e. ID 03 on segment A, ID 04 on segment B, etc.)
Since the Cresnet network is polled by the control system in numeric order,
the control system will talk to different segments, allowing each segment to
process commands that overlap, instead of having to wait for the
completion of one command before going on to the next command.
Example
The following example is provided to show how a large amount of network devices
may be connected to the C2N-NPA8 for optimum performance.
A system has the following network devices:
• Five TPS-3000L touchpanels. The touchpanels have been assigned with
Cresnet ID numbers 03 through 07.
• Five CT-1000 touchpanels. The touchpanels have been assigned with
Cresnet ID numbers 08 through 0C.
• Five TPS-4500 touchpanels. The touchpanels have been assigned with
Cresnet ID numbers 0D through 11.
• Two C2N-IIF intercom interfaces. The interfaces have been assigned with
Cresnet ID numbers 12 and 13.
• Three C2N-TXM satellite radio tuners. The tuners have been assigned
Cresnet ID number 14 through 16.
Using the configuration tips, connect the network devices as shown in the following
diagram.
10 • Network Poll Accelerator: C2N-NPA8 Operations Guide – DOC. 6087A
- Crestron C2N-NPA8 1
- Network Poll Accelerator 1
- Operations Guide 1
- Contents 3
- Network Poll Accelerator: 5
- Specifications 6
- Physical Description 7
- Ports/Connectors 8
- NET A - H 8
- Standard DB9 Pin Assignments 9
- Compatible Control Systems 10
- Industry Compliance 11
- Network Wiring 11
- Mounting Options 12
- Hardware Hookup 13
- Example 14
- Configuration Tips 14
- Configuration Example 15
- Power Connections 16
- C2N-NPA8 17
- CNPWS-75 17
- To Control System via TCP/IP 17
- C2N-NPA8 IP Table 20
- RJ45 Pinouts 21
- “Port Settings” Window 21
- REPORTCRESNET with C2N-NPA8 22
- Programming Software 23
- Device Settings 25
- Uploading and Upgrading 26
- Upload via SIMPL Windows 28
- Upload via Crestron Viewport 28
- “Send Program” Window 29
- Problem Solving 31
- Network Analyzer 33
- Further Inquiries 34
- Future Updates 34
- Software License Agreement 35
- PROPRIETARY RIGHTS 36
- GOVERNING LAW 36
- CRESTRON LIMITED WARRANTY 36
- Return and Warranty Policies 37
Powiązane produkty i podręczniki dla Networking Crestron C2N-NPA8
Networking Crestron QM-MD4X2 Dokumentacja
(40 strony)
(40 strony)
Networking Crestron ML-600 Dokumentacja
(16 strony)
(16 strony)
Networking Crestron ST-LT Instrukcja Użytkownika
(14 strony)
(14 strony)
Networking Crestron MC2W Dokumentacja
(28 strony)
(28 strony)
Networking Crestron CH-DIM4-D9 Dokumentacja
(56 strony)
(56 strony)
Networking Crestron V24-IMCW-C Dokumentacja
(24 strony)
(24 strony)
Networking Crestron CEN-COM Dokumentacja
(28 strony)
(28 strony)
Krystal Touch of NY DL3608BPRI manuals
Owner’s manuals and user’s guides for Unknown Krystal Touch of NY DL3608BPRI.
We providing 1 pdf manuals Krystal Touch of NY DL3608BPRI for download free by document types: Installation Guide
Komentarze do niniejszej Instrukcji