LIGHTING AND AUTOMATION
infiNET Wall Box Switch CLW-SW1RF
infiNET™ Dimmers and Switches
The CLW-SW1RF is a 1000 watt wall mount switch designed
to operate as part of a complete Crestron automation system
communicating via the infiNET wireless control network.
Without the need for additional control wiring, the CLW-SW1RF
easily replaces any standard in-wall light switch. Although
functional as a standalone switch, the CLW-SW1RF delivers
enhanced automation and control capability when connected
to Crestron's PAC2 or PAC2M automation control system
(or any other 2-Series control system) via the infiNET network.
infiNET™—Crestron’s groundbreaking infiNET wireless
technology affords reliable 2-way communications
throughout a home or office structure without the need
for physical control wiring. Numerous infiNET switches,
dimmers, and other devices can be linked to the control
system via a single RF gateway. Employing a 2.4 GHz mesh
network topology, every infiNET device functions as an RF
repeater, increasing effective range and reinforcing the
complete network by providing multiple redundant signal
paths within the mesh network.
Intuitive Lighting Control—The single large rocker button
provides simple on/off operation to control a range of lighting
or fan loads. An adjustable turn-off delay allows the user time
to exit the room before the lights shut off.
A slide switch is also provided to select between RUN,
SET, and OFF modes. RUN is the normal operating mode
as described above. SET mode is used for setting the delay
time, while switching to the OFF mode completely disables
the light switch and disconnects all power to the load to
facilitate changing bulbs. The status LED serves a dual
purpose, providing helpful status confirmation during operation
and setup, and glowing dimly when idle to make the switch
easy to locate in the dark.
Automation System Integration—Its connection to
a control system allows the functions of the CLW-SW1RF to
be controlled from touchpanels, keypads, wireless remotes,
and computers to support unlimited flexibility for remote
control and integration with other devices and systems.
However, in the event that communication with the control
system is disrupted for any reason, the CLW-SW1RF will
remain operable to control the lighting circuit.
Easy Installation—System design, installation, and upgrade
using infiNET switches could not be easier. Since there’s
no control wire required, the CLW-SW1RF can be installed
just like any conventional light switch. Multiple units may be
ganged side-by-side along with other switches, dimmers,
and non-Crestron devices. (Note: Ganging the CLW-SW1RF
typically requires the removal of the side heat sink fin on one
or both sides of the unit resulting in a derating of its load
capacity; see specifications below.)
lighting & automation
Setting up a complete network of infiNET devices is simple,
utilizing dynamic discovery (self-install) to locate and acquire
each RF device automatically. Setting the RF ID of each device
employs the same convention as Crestron's familiar TSID
method, and each device is programmable using Crestron
SIMPL™Windows
®
, SystemBuilder™ or D3Pro™ software
just like any wired Cresnet device. Even firmware updates
are performed over the wireless network.
No further action is required to configure the infiNET network.
Each device assigned to a common gateway automatically
behaves as a repeater for any other devices within range
(approximately 150 feet indoors), and additional repeaters
may be added if necessary. At all times, the infiNET gateway
monitors each device on the network, ignoring any other
2.4 GHz signals, and reconfiguring the entire network
automatically in response to new sources of interference
and other changes in RF conditions.
Color Options—infiNET Dimmers and Switches are available
in white, black, or almond, with or without custom button
engraving*. Complete installation requires a Decora
®
style
faceplate (not included).
Decorative Wall Mount Switch
Crestron System Integration via infiNET Wireless Network
On/Off Control of Incandescent, Fluorescent, Neon, Cold Cathode,
Magnetic or Electronic Low-Voltage, HID, and Fan Loads
Intuitive Rocker Switch Operation
Adjustable Turn-off Time Delay
4-Button and Dimmer Versions Also Available
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
611
> continued
(3 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji