Crestron ML-500 Dokumentacja Pobierz pdf (Strona 24)

Mini LCD RF Wireless Handheld Remote Crestron ML-500

Connection Diagram for Uploading VT Pro-e Projects to the ML-500

NOTE: You cannot operate the ML-500 while a file is loading.

NOTE: All of the communication parameters are automatically set when uploading

to the ML-500.

The following table lists the pin assignments for the included serial cable.

Serial Cable Pin Assignments

DB9 3.5mm Plug DESCRIPTION

3 Tip Transmit

2 Ring Receive

5 Shield Ground

The VT Pro-e project file can be uploaded to the remote using VT Pro-e or via the

Crestron Viewport.

Upload via VT Pro-e

1. Start VT Pro-e.

2. Select File | Open | Project to view the “Open” window, navigate to the

VT Pro-e file (.vtp), and click Open.

3. Select File | Upload Project. This automatically selects the compiled .hex

file as shown in the following diagram.

“Upload Project” Window

4. Click Upload to open the “ML-500 Transfer” window. If the ML-500 is

connected to the selected serial port, the upload will begin automatically. If

the ML-500 is connected to a serial port other than the selected port, a

message stating, “No device found” will be displayed to the right of the

20 • Mini LCD RF Wireless Handheld Remote: ML-500 Programming Guide – DOC. 6263

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Brak uwag

Crestron ML-500 Dokumentacja Strona 24