Crestron STRFGWX Dokumentacja Strona 32
- Strona / 40
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
2-Way RF Wireless Touchpanel Crestron STX-1700C
Appendix A: Engraveable Pushbutton Installation
Custom-engraved pushbuttons can be obtained by ordering the Customizable
Engraving Button Kit 1700C-BTBN. You can submit the engraving layout in two
ways:
• Engraving Sheet, Doc. 6069.
• Engraving Software package, Version 1.1.1.6, available from the
Downloads | Software Updates section of the Crestron website
(www.crestron.com
).
Perform the following to install engraveable pushbuttons on the ST-1700C. A #1
Phillips screwdriver is required. Refer to the illustrations below.
1. Remove the battery, and place the touchpanel face down on a clean work
surface.
2. Remove the four screws securing the front bezel to the base, and return the
unit to its normal position (use care to prevent the bezel from dropping and
becoming damaged).
3. Lift the bezel from the touchpanel, and remove the pushbuttons being
replaced. Note that the pushbutton sets fit snugly.
4. Put the new pushbuttons in place (see following Note), press firmly to
ensure they are seated, and place the bezel back in position.
NOTE: The rear of the pushbuttons are marked TOP 1-5 and 6-10 to ensure correct
orientation when installed. Do not remove the plastic frame connecting the buttons
together.
5. Hold the bezel in place and turn the unit over on its face.
6. Reinstall the four screws to secure the bezel to the base. Tighten the screws,
being careful not to strip the threads.
7. Reinstall the battery and verify that the pushbuttons function properly.
Engraveable Pushbutton Installation Diagram
Battery
ScrewScrew
Bezel
Pushbuttons
Bottom view
Top view with
bezel removed
5
10
28
• 2-Way RF Wireless Touchpanel: STX-1700C Operations Guide - DOC. 6049
- Crestron STX-1700C 1
- 2-Way RF Wireless Touchpanel 1
- Operations Guide 1
- Contents 3
- STX-1700C 5
- Roaming Feature 6
- Specifications 7
- Physical Description 8
- Physical Views (continued) 9
- Industry Compliance 10
- Applying Power 10
- Identity Codes 11
- Configuring the Touchpanel 12
- Battery Status 13
- Select Interface 13
- Key Click Setup 14
- Brightness 14
- Startup Preference 14
- DIAGNOSTICS MENU 15
- Uploading and Upgrading 16
- “Port Settings” Window 18
- Uploading a VT Pro-e Project 19
- Firmware Upgrade 20
- Select CSF File 21
- Programming 22
- PRO2 System View 23
- Expanded PRO2 System Tree 23
- C2Net Device, Slot 9 24
- CRESTRON 27
- Problem Solving 29
- POSSIBLE 30
- CAUSE(S) 30
- CORRECTIVE ACTION 30
- Front of 34
- Building 34
- Software License Agreement 35
- PROPRIETARY RIGHTS 36
- GOVERNING LAW 36
- CRESTRON LIMITED WARRANTY 36
- Return and Warranty Policies 37
- Tel: 888.CRESTRON 40
Powiązane produkty i podręczniki dla Bramy / kontrolery Crestron STRFGWX
Bramy / kontrolery Crestron STRFGWX Dokumentacja
(40 strony)
(40 strony)
Bramy / kontrolery Crestron ML-500 Dokumentacja
(30 strony)
(30 strony)
Krystal Touch of NY DL3609CPRI manuals
Owner’s manuals and user’s guides for Unknown Krystal Touch of NY DL3609CPRI.
We providing 1 pdf manuals Krystal Touch of NY DL3609CPRI for download free by document types: Installation Guide
Komentarze do niniejszej Instrukcji